Can You Use Krud Kutter On Hardwood Floors?

Generally, people avoid using run-of-the-mill degreasers and liquid cleaners on wood floors. And they’re absolutely right to do so since the chemicals in these cleaners can damage the finish on the furnished wood floors. But sometimes a simple warm water rinse and dry can’t remove all the dirt from the laminated hardwood floors. So, can you use Krud Kutter on wood floors without damaging the expensive panels?

You can use Krud Kutter on wood floors to wash off the greasy substrates without damaging the wood and finish. Many housekeepers love to use Krud as one of those all-purpose cleaners since it works effectively and efficiently. With Krud, you can swiftly remove the dirt & grease on wood floors without compromising the luster or the finish.

But that doesn’t mean the wood floors are completely invulnerable to the chemicals in Krud. To maintain maximum efficiency, you have to use the right amount of Krud Kutter and keep an eye on the duration of the exposure. In today’s article, we’ll go over all the logistics and precautions of using Krud Kutter on wood floors in general.

Can You Use Krud Kutter On Wood Floors?

It’s important to keep hardwood floors free of grease and dirt. Krud Kutter can efficiently take care of this specific job with half the effort, time, and energy. 

Just a quick gentle scrubbing with immediate rinsing and drying – and that’s it! The wood floors will feel rejuvenated in no time at all with the application of Krud Kutter.

Here’s why you should use Krud Kutter on wood floors –

To Degrease The Surface

degrease hardwood floors

Wood floors can develop a lot of grime over time and get sticky to the point of being absolutely disgusting. Additionally, if you’re using cheap synthetic rugs or carpets with adhesive bottoms, the glue can dissolve and disintegrate.

The dissolved glue makes the floor sticky and greasy. Afterward, the sticky panels trap all the loose dust particles, dehydrated chipped wood, fatty substances, etc. Krud Kutter is more than essential to fully clean up the annoying adhesive segments off the floor.

To Protect The Luster

One of the main reasons why you shouldn’t use regular cleaners or dish soaps on wood floors – they can tamper with the chemicals in the wood finish. 

Many cleaners often break the polymer bonds in the sealants and cause the floor to become fragile from within.

Since Krud Kutter is primarily a degreaser, it doesn’t immediately ruin the finish on wood floors. Even a concentrated solution of Krud Kutter can’t degloss and so, you should use it to protect the luster of the hardwood floors. 

To Preserve The Freshness

Using mineral spirit, hydrogen peroxide, bleach, etc. can leave a slight yet discernible chemical odor on the floor. Continuous use of these chemicals can gradually overpower the overall fresh and non-toxic smell of the room.

But Krud Kutter is a water-based chemical solution. And it’s chemically diluted enough to not leave any lingering smell. Hence, by using Krud to clean wood floors, you can ensure and preserve freshness throughout the house.

To Ensure Deep Cleaning

Being a potent degreaser, Krud Kutter keeps dissolving the layers of grime until there’s nothing left. You can and should use it on wood floors with tile-like segments since the solution can reach between the edges for deep cleaning.

By keeping the solution on the deep grooves for a few minutes, you can soften the grime easily. Afterward, a quick scrub or two will get all the fatty substrates off the segments!

When Should You Not Use Krud Kutter On Wood Floors?

Just because Krud Kutter helps to de-grease your wood floors easily, doesn’t mean you should use it all the time! In fact, excessive use of this degreaser will generate harmful effects.

The harmful effects include – discoloration, sealant damage, slight chips and cracks, premature degloss, etc. Here’s when you should NOT use Krud Kutter on wood floors –

Normal Clean-Up

Clean wood floors don’t need degreasers like Krud Kutter every other day. You can simply use a moist towelette or microfiber mop to gently wipe the floor for normal cleaning.

Raw Wood Floors

Do not, under any circumstances, use Krud Kutter on unfinished hardwood floors. You’ll ruin the wood right away and the damage could be irreversible in many cases. 

Presence Of Strong Agents

If you’ve recently used strong dissolving cleaners or oxidizing agents on the wood floors, refrain from using Krud Kutter on top of those chemicals. The passive reaction can cause significant discoloration and even bleach the surfaces.

Will Krud Kutter Damage Wood Plank Partitions?

Krud Kutter dissolves grease and glue-like substances. Hence, it’s important to notice if the wood plank partitions have been joined by any intermediary adhesive layers.

If that’s the case, then it’s advisable to not use Kurd Kutter on such planks, especially around the edges. You can still use the degreaser to methodically clean the middle area only. 

Does Krud Kutter Degloss Hardwood Floors?

Krud Kutter can degloss hardwood floors under the effect of two specific conditions. Normally, Krud doesn’t really affect the glossiness of engineered wood floors at all. 

But if the floor has been refurbished recently, then Krud can easily damage the softly settled sealants. Hence, the first condition involves the application of Krud Kutter on prematurely treated wood floors.

Again, if you’re mixing other cleaners with Krud to “increase the potency”, you can do more harm than good. The second condition will take effect when you apply highly concentrated chemicals/cleaners alongside Krud for cleaning. You’ll end up ruining the luster instead.

Final Verdict

So, can you use Krud Kutter on wood floors to prevent sticky surfaces? Absolutely!

But can you rely on Krud Kutter too much and use it consecutively to maintain the pish-posh luster? Nope!

Like everything else in life, Krud Kutter comes with its own sets of demerits and corrosive effects. While it’s okay to use the degreaser for the occasional grease cleaning, it’s best to avoid applying Krud every day on wood/hardwood surfaces.

Leave a Comment

Your email address will not be published. Required fields are marked *